What does P0003 mean on a Subaru?

P0003 on Subaru models means: Fuel and Air Metering System Malfunction (Circuit 0003). Confirm with a live scan and check manufacturer TSBs before repair.

Is it safe to drive with P0003 on a Subaru?

Driving with P0003 depends on severity and symptoms. If the check engine light is flashing or you notice power loss, stop driving and diagnose using OEM procedures.

How do I fix P0003 on Subaru?

Start with a full system scan, inspect related wiring and connectors, then follow Subaru-specific OEM test steps. Auto Fix Data includes factory procedures and wiring diagrams for Subaru models.

AutoFixData

P0003Subaru

P0003 on Subaru— Symptoms, Causes & OEM Fix

P0003 on Subaru vehicles (Outback, Forester, Crosstrek, Impreza) typically indicates: Fuel and Air Metering System Malfunction (Circuit 0003). Use OEM wiring diagrams and step-by-step diagnostic procedures to isolate the fault before replacing parts.

Common Symptoms of P0003

• Check Engine Light (CEL) Illumination
• Potential decrease in fuel and air metering system efficiency
• Engine performance issues related to circuit 0003
• Possible stall or rough idle

What Causes the P0003 Code?

• Faulty sensor or actuator in fuel and air metering system
• Corroded, broken, or shorted wiring harness
• Poor electrical connection
• In rare cases, a failing Engine Control Module (ECM)

Popular Subaru models affected

Workshops frequently report P0003 on Outback, Forester, Crosstrek, Impreza, Ascent, WRX. Always verify the fault on the exact vehicle using OEM data for the correct model year and engine code.

Browse Subaru repair manuals → · Generic P0003 guide →