What does P0003 mean on a Honda?

P0003 on Honda models means: Fuel and Air Metering System Malfunction (Circuit 0003). Confirm with a live scan and check manufacturer TSBs before repair.

Is it safe to drive with P0003 on a Honda?

Driving with P0003 depends on severity and symptoms. If the check engine light is flashing or you notice power loss, stop driving and diagnose using OEM procedures.

How do I fix P0003 on Honda?

Start with a full system scan, inspect related wiring and connectors, then follow Honda-specific OEM test steps. Auto Fix Data includes factory procedures and wiring diagrams for Honda models.

AutoFixData

P0003Honda

P0003 on Honda— Symptoms, Causes & OEM Fix

P0003 on Honda vehicles (Civic, Accord, CR-V, HR-V) typically indicates: Fuel and Air Metering System Malfunction (Circuit 0003). Use OEM wiring diagrams and step-by-step diagnostic procedures to isolate the fault before replacing parts.

Common Symptoms of P0003

• Check Engine Light (CEL) Illumination
• Potential decrease in fuel and air metering system efficiency
• Engine performance issues related to circuit 0003
• Possible stall or rough idle

What Causes the P0003 Code?

• Faulty sensor or actuator in fuel and air metering system
• Corroded, broken, or shorted wiring harness
• Poor electrical connection
• In rare cases, a failing Engine Control Module (ECM)

Popular Honda models affected

Workshops frequently report P0003 on Civic, Accord, CR-V, HR-V, Pilot, Odyssey. Always verify the fault on the exact vehicle using OEM data for the correct model year and engine code.

Browse Honda repair manuals → · Generic P0003 guide →